Quantcast
Berkeley Lab

Eaton Electrical Meter Breakers Recall

Both Meter Breakers_LARGEMBED Safety Recall

Recall Date: December 2, 2014
Recall Number: 15-710

Eaton Recalls Electrical Meter Breakers Due to Shock Hazard (Recall Alert)

This recall involves MBED 3042 series residential meter breaker. The meter breakers are service entrance equipment systems that consist of a single meter socket and load center or a meter socket and main breaker combined in one enclosure. The meter breakers have gray metallic enclosures and measure about 14¼ inches wide by 42½ inches high by 7 inches deep. The recalled units have catalog numbers MBED3042B200BF, MBED3042B200BF6, MBED3042B225PV or MBED3042PV200BF. The catalog number is located on the unit’s packaging. The enclosures have a single warning label on the bottom of the lower right compartment door, which is secured with a latch and hasp at the bottom. Consumers should not open the meter breaker’s enclosure.

Units were sold at authorized distributors in California and Nevada from July 2014 through August 2014.

See additional information on the recall on the Eaton web site HERE.

Fluke Recalls

fluke_logo_166px_x_50px

 

Check here for recalls on Fluke products.

Safety Notice and Recall of Fluke BC1735/EELV Power Adapter

July 25th, 2014Fluke Recall 1

Fluke is voluntarily recalling certain BC1735/EELV Power Adapters which are used with the Fluke-1735 Power Logger. Fluke has determined that in some cases the housing fastening points of the BC1735/EELV Power Adapters shipped between 04/01/2014 and 06/24/2014 may be loose, which may lead to separation of the housing. This risk could result in electrical shock which may cause serious injury.

All BC1735/EELV Power Adapter models with the date code stamp 03140 are affected by this recall. If your power adapter date code has an “N” in front of it (N03140), your adapter has been reworked and is NOT part of the recall.

More detail at the Fluke Web Site

 

FLUKE_28_II_EX_01Recall of Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeters

March, 2013

Fluke is voluntarily recalling certain 28 II Ex Intrinsically Safe True-rms Digital Multimeters that were shipped between July 1, 2012 and November 30, 2012.

The Fluke part numbers and serial numbers affected are listed on the Fluke web site HERE.

To determine if your digital multimeter is affected by this recall notice, enter your model and serial number in the box on the Fluke web site and click “Verify.” Any serial number preceded or followed by the letter “R” is not affected by this recall notice.

 

Recall of Fluke 373, 374, 375 and 376 Digital Clamp MetersFluke Recall 3-2

January, 2013

Fluke is voluntarily recalling certain 373, 374, 375 and 376 Digital Clamp Meters that were manufactured between September 1, 2010 and October 31, 2012.

The models and serial numbers affected are listed on the Fluke web site HERE.

To determine if your clamp meter is affected by this recall notice, enter your model and serial number in the box on the Fluke web site and click “Check.” Any serial number preceded or followed by the letter “R” is not affected by this recall notice.

« Previous Page